robertz Posted September 22, 2015 Share Posted September 22, 2015 Hi, I got a Zybo board, is there any simple examples using the XADC or the codec. I tried looking at a nexys4 example, but can't make it work. Link to comment Share on other sites More sharing options...
cristian.ignat Posted March 3, 2016 Share Posted March 3, 2016 Hello, If you want to use the XADC as a ADC then in Basic window select "Channel Sequencer" and in Channel Sequencer window select the "vauxp6/vauxn6", "vauxp15/vauxn15", "vauxp7/vauxn7" and/or "vauxp14/vauxn14". Please pay attention because XADC pins supports only 0V:1V or -0.5V:+0.5V deferentially. Please see the following topic: Cristian Link to comment Share on other sites More sharing options...
Question
robertz
Hi, I got a Zybo board, is there any simple examples using the XADC or the codec. I tried looking at a nexys4 example, but can't make it work.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.