XADC in zynq FPGA

[sourav]

In XADC header its given that we can give 17 external analog inputs. How to give them?

[jpeyron]

Hi @sourav,

If your question is still in reference to the Zedboard then you will need to use an FMC breakout board to access the rest of the xadc signals. On page 9 of the schematic here  has Bank 35 that shows which pins on the FMC are tied to the XADC. I did also find this xilinx daughter board that might be helpful as well here.

[sourav]

Thanks. But how many analog inputs can i give through this AMS 101 evaluation card . from the manual i guess its 2 only..am i right??

[JColvin]

Hi @sourav,

I have merged your question with the previous thread you were working on. As for the AMS 101 evaluation card from Xilinx, it appears that only 2 analog inputs are available on the board; you will need to contact Xilinx if you want a more definitive confirmation though as they are the ones who made the board.

Thanks,
JColvin