PmodWifi fails to connect and overheats

[tester11]

I run the httpserver on an Arty board  and I get in console

WiFi Connection Established
Dynamic begin
Is Linked to the physical network
Link status: 0x0
Timeout occured
Shutting down
Resting for 30 seconds
30 seconds until restart
10 seconds until restart
Done resting
WiFi Connection Established
Dynamic begin
Is Linked to the physical network
Link status: 0x0
Timeout occured
Shutting down
Resting for 30 seconds
30 seconds until restart
10 seconds until restart
Done resting
WiFi Connection Established
Dynamic begin
Is Linked to the physical network
Link status: 0x0
Not Initialized
Hard Error status 0x10011007 occurred.
Shutting down
Resting for 30 seconds
30 seconds until restart
20 seconds until restart

 

So I don't get anymore Network initialized .What can cause this problem?The Pmod also overheats.

[jpeyron]

Hi @tester11,

The error you are getting is ipsIPNotSetup in the deIP.h.  Did you configure the HTTP server in the HTTPServerConfig.h? You can find it here: deWebIOServer/HTTPServerConfig.h.  Does the pmod get to hot to touch?

thank you,

Jon

 

 

 

 

[tester11]

18 minutes ago, jpeyron said:

Hi @tester11,

The error you are getting is ipsIPNotSetup in the deIP.h.  Did you configure the HTTP server in the HTTPServerConfig.h? You can find it here: deWebIOServer/HTTPServerConfig.h.  Does the pmod get to hot to touch?

thank you,

Jon

 

 

 

 

I used the same http server files already configured that worked in other project,I checked a few times the user and password are correct .Yes ,the metal region is too hot to be touched after 2/3 minutes of running the server

[jpeyron]

Hi @tester11,

Does the Pmod WIFI still work in the other project?

thank you,

Jon

 

[tester11]

19 hours ago, jpeyron said:

Hi @tester11,

Does the Pmod WIFI still work in the other project?

thank you,

Jon

 

It doesn't ,I tried with your example from another topic that worked in the past ,now it doesn't.

I remember that in the past when I used the http server on the same example it worked only after I turned it down and started it again but now I tried this too many times.

Can it be broken? I didn't put any force on it .

[jpeyron]

Hi @tester11,

Do you remember the Pmod WIFI ever smoking? Is there any physical damage? Have you only used the Pmod WIFI with the Pmod Ports?

thank you,

Jon

[tester11]

16 hours ago, jpeyron said:

Hi @tester11,

Do you remember the Pmod WIFI ever smoking? Is there any physical damage? Have you only used the Pmod WIFI with the Pmod Ports?

thank you,

Jon

I use also other Pmods,no smoking,no damage as I see.

Hard error should mean a bad interaction with the Pmod,am I right?

[jpeyron]

Hi @tester11,

I have sent you a PM about the RMA process.

thank you,

Jon