• 0
tekson

Implement CSI,DSI, USB(UVC ), RGB and HDMI in Zynq 7000

Question

Hi all,

I m a beginner in FPGA(zync 7000).

I want to implement a project which took images from two cameras, one with usb(uvc) interface and one with csi-2 interface. 

One thing to note that i not using both cameras simultaneously. Only once at a time(Switch over whenever required)

With first USB camera,  i want to do some image proseesing functions like filtering and CLAHE(Contrast-limited adaptive histogram equalization) on the captured image. Then the processed is images is displayed on a HDMI  or  RGB interface mini projector(DLP 2000). 

Here i indicated both HDMI and RGB interface because of i need to test the performance of both interfaces with HDMI input projector and RGB input interface TI DLP 2000 mini projector.

 

And I also need to display the image which is captured from the second CSI-2 camera and do a little enhancements, then display it in a DSI 5 inch LCD screen(51 pin MIPI DSI)

the details link of cameras , projectors and  lcd is given below

USB Camera: http://www.elpcctv.com/mi5100-5mp-usb-camera-module-usb20-aptina-125inch-color-cmos-sensor-100degree-lens-p-221.html

CSI-2 Camera: https://www.waveshare.com/product/rpi-camera-f.htm

DLP 2000 RGB - projector: http://www.ti.com/tool/DLPDLCR2000EVM

HDMI projector: https://www.ebay.in/itm/302673956725?aff_source=Sok-Goog

Display : https://www.alibaba.com/product-detail/5-inch-720p-oled-display-720_1925219941.html?spm=a2700.7724838.2017115.42.6ba11d77AqfGq7

 

Can anyone please help me to build this project. Just give some basic idea like

1. which zynq version is suitable for this application?

2. Board design, start from scratch zynq design or any SOM modules having zynq 7000

3. Hard core or soft core ip?

4. best evaluation board for this design?

I also need suggestions for above said questions.

I want to do this in an industrial design way, so that i m asking help from others and I m just a beginner in this field, expecting good support from this forum.

Great thanks in advance....................

Edited by tekson

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Hi @tekson,

This sounds like a cool project! The only dev board we have with a csi-2 interface is the zybo Z7. It only has the one csi-2 interface so you not be able to use both the csi-2 camera and the display at the same time. It has HDMI and a zynq processor. We have the Pmod VGA that would facilitate the VGA connection. I think the easiest way to facilitate your project is with embedding linux os on the board. We have a petalinux project build for either version for this board as well. We have a few projects done for the Zybo Z7 as well as some info with hls on the resource center here.

thank you,

Jon

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now