cucchi Posted February 19, 2018 Share Posted February 19, 2018 Hi, Is it possible to get the board layers in Altium for Part Number 410-319 Arty board? Link to comment Share on other sites More sharing options...
jpeyron Posted February 19, 2018 Share Posted February 19, 2018 Hi @cucchi, We do not provide the Altium files for the Arty board. Here is the resource center for the Arty board which has the schematic, xdc,3D CAD files, reference manual, demo's, tutorials and projects. thank you, Jon Link to comment Share on other sites More sharing options...
cucchi Posted February 20, 2018 Author Share Posted February 20, 2018 On the DDR3 Ram some of the I/O and clocking are tuned speed dependent traces. The data I/O and Address I/O are however not shown this way in the schematics. Is the data and Address I/O supposed to have tuned traces with the clock?? Thank You Link to comment Share on other sites More sharing options...
JColvin Posted February 20, 2018 Share Posted February 20, 2018 Hello @cucchi, I asked the appropriate engineer about this and they told me that "Yes, the data, address and clock are supposed to be delay matched. The Arty DDR3 traces are all delay matched to within 1mm." Let me know if you have any questions. Thank you, JColvin Link to comment Share on other sites More sharing options...
Question
cucchi
Hi,
Is it possible to get the board layers in Altium for Part Number 410-319 Arty board?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.