BenOve Posted January 16, 2018 Share Posted January 16, 2018 Hi re Analog Discovery 2 Configuration in Device Manager is kept default: Scope 2x8k Wavegen 2x4 k Logic 16 x 4k Patterns 16x1k Question: Can Wavegen and Patterns be triggered simultaneously and generate output in parallell, 2 analoge channels and 16 bit logic simultaneous and perfectly syncronized ? Link to comment Share on other sites More sharing options...
JColvin Posted January 16, 2018 Share Posted January 16, 2018 Hi @BenOve, I have moved your question to a more appropriate section of the Forum. My understanding is that you can set external trigger on both the WaveForm Generator and Pattern generator to the same source so they will be started simultaneously. There is a tutorial on external triggers here: https://reference.digilentinc.com/learn/instrumentation/tutorials/ad2-external-triggers/start Link to comment Share on other sites More sharing options...
attila Posted January 16, 2018 Share Posted January 16, 2018 Hi @BenOve Yes. You can use the same trigger source for Wavegen and Patterns or trigger one on the other. Uncheck repeat-trigger in both instruments to trigger only on start and repeat the output, or leave checked for burst output on each (external) trigger. Specify finite run time specially for Wavegen since the frequency of these analog signals can shift relative to the digital. Link to comment Share on other sites More sharing options...
Question
BenOve
Hi
re Analog Discovery 2
Configuration in Device Manager is kept default: Scope 2x8k Wavegen 2x4 k Logic 16 x 4k Patterns 16x1k
Question: Can Wavegen and Patterns be triggered simultaneously and generate output in parallell,
2 analoge channels and 16 bit logic simultaneous and perfectly syncronized ?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.