loberman Posted January 10, 2018 Share Posted January 10, 2018 [IP_Flow 19-4965] IP PmodOLED_axi_gpio_0_0 was packaged with board value 'digilentinc.com:arty-z7-20:part0:1.0'. Current project's board value is 'digilentinc.com:arty:part0:1.1'. Please update the project settings to match the packaged IP. I went ahead and ignored these, does this mean I should not be using the PMOD with Arty and only Arty Z. How do I update the IP for this. Thanks Laurence Link to comment Share on other sites More sharing options...
jpeyron Posted January 10, 2018 Share Posted January 10, 2018 Hi @loberman, You can ignore these. It is just letting you know that the IP core was made with a different board. thank you, Jon Link to comment Share on other sites More sharing options...
loberman Posted January 10, 2018 Author Share Posted January 10, 2018 Ack and thanks Its working, so agreed and so I figured its cosmetic. By the way, working on documenting a "Complete Arty Linux on Microblaze with all manual kernel builds and access to all hardware from Linux.". Will be useful for a lot of people and its really Jeff, Raul, yourself and others that have all contributed. I did have a lot of prior experience on Spartan6/Microblaze over 5 years ago that helped with the Kernel stuff. Thanks Laurence Link to comment Share on other sites More sharing options...
Question
loberman
[IP_Flow 19-4965] IP PmodOLED_axi_gpio_0_0 was packaged with board value 'digilentinc.com:arty-z7-20:part0:1.0'.
Current project's board value is 'digilentinc.com:arty:part0:1.1'. Please update the project settings to match the packaged IP.
I went ahead and ignored these, does this mean I should not be using the PMOD with Arty and only Arty Z.
How do I update the IP for this.
Thanks
Laurence
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.