smarano 0 Posted November 20, 2017 Hi, i want to know if this digilent component JTAG-SMT2: Surface-mount Programming Module Information is capable to program efuse register for artix 7 FPGA regards Stefano Share this post Link to post Share on other sites
0 jpeyron 657 Posted November 21, 2017 Hi @smarano, Bases on the Xilinx thread Here Xilinx discusses that JTAG SMT 1/2 work with eFuse. cheers, Jon Share this post Link to post Share on other sites
0 smarano 0 Posted November 21, 2017 (edited) Hi @jpeyron I read that JTAG SMT2-NC isn't capable to program efuse. I found this information in the datasheet. The JTAG SMT2 has the same features of SMT2-NC plus a usb connector. In the datasheet of SMT2 module i don't find nothing about efuse but i suppose that if it works as SMT2-NC so it isn't capable to program efuse. My supposition is correct or those boards are different? Edited November 21, 2017 by smarano Share this post Link to post Share on other sites
0 jpeyron 657 Posted November 21, 2017 Hi @smarano, We used the same PDID on the JTAG-SMT2-NC so it should work exactly the same as the SMT2. I believe at the time that the reference manual was written efuse wasn’t supported but is now. I have changed the wiki reference manual page and put a request to change the PDF reference manual to reflect this. cheers, Jon Share this post Link to post Share on other sites
Hi, i want to know if this digilent component JTAG-SMT2: Surface-mount Programming Module Information is capable to program efuse register for artix 7 FPGA
regards Stefano
Share this post
Link to post
Share on other sites