aitan Posted November 14, 2017 Share Posted November 14, 2017 Is there a compact software utility to load the .bit or .bin file or both . It would be helpful if you want to send those files to people that do not use Vivado or if you just need to reprogram on a computer that does not have the Vivado SW thanks Aitan Link to comment Share on other sites More sharing options...
jpeyron Posted November 14, 2017 Share Posted November 14, 2017 Hi @aitan, Adept 2 here can program bit files. This software can program the flash on some of our older boards as well (not Artix-7 or Zynq fpga's). cheers, Jon Link to comment Share on other sites More sharing options...
aitan Posted November 15, 2017 Author Share Posted November 15, 2017 Thanks, I assume it would work with Basys3 . Aitan Link to comment Share on other sites More sharing options...
jpeyron Posted November 15, 2017 Share Posted November 15, 2017 Hi @aitan, Yes, Adept 2 will program bit files on the Basys 3. I attached a screen shot of the Adept 2 connected to a Basys 3. It will not program the flash. thank you, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted November 15, 2017 Share Posted November 15, 2017 Hi @aitan, I just generated a bitstream in Vivado 2016.4 using the abacus project here. I then programmed Basys 3 with the bit file using Adept 2. I have attached a screen shot of this and the bit file as well. cheers, Jon Basys3_Abacus_Top.bit Link to comment Share on other sites More sharing options...
Question
aitan
Is there a compact software utility to load the .bit or .bin file or both .
It would be helpful if you want to send those files to people that do not use Vivado or if you just need to reprogram on a computer that does not have the Vivado SW
thanks
Aitan
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.