Error analog discovery configuration. USB, PLL

[anil]

I have an analog discovery and connected with the USB cable to my computer Windows 7 and it gives me this error. 

 

[attila]

Hi @anil

Please see the following post:

 

It also looks like you are also using an old version of WaveForms.
You can find the latest one at: https://reference.digilentinc.com/waveforms3

[anil]

7 minutes ago, attila said:

Hi @anil

Please see the following post:

 

It also looks like you are also using an old version of WaveForms.
You can find the latest one at: https://reference.digilentinc.com/waveforms3

It is an Analog Discovery 1

I see a red LED glowing on the analog discovery

Also do you know how to change the com port to which it connects? I use my laptop to connect other hardware too.

[attila]

Hi @anil

Do I understand right that the AD1 is working now?

For AD 1/2 directly the USB (driver) is used and no (virtual) COM port.

[anil]

@attila no,  I was just adding more information to my post. I will uninstall waveforms and install the latest version from your link and try again. 

 

[anil]

3 hours ago, attila said:

Hi @anil

Do I understand right that the AD1 is working now?

For AD 1/2 directly the USB (driver) is used and no (virtual) COM port.

@attila

I was able to try again just now.

Uninstalled Waveforms and downloaded the latest one from your link.

Still error.

 

[anil]

I tried with a short USB cable and do not get the error popup. It seems fixed.

I shall try the Quick Start tutorials to test if it works OK or if there are any other issues. Thanks for your help!