mustafayilmaz Posted October 1, 2017 Share Posted October 1, 2017 Labview very complicated for analog discovery. I want to process real signals simply. İs there any way Analog discovery scope using as analog input/output? (And digital signals) Like this : Link to comment Share on other sites More sharing options...
AustinStanton Posted October 2, 2017 Share Posted October 2, 2017 Hey mustafayilmaz What VI package are you using to communicate with the Analog Discovery? There is the Digilent Waveforms VIs, this is the package that Labforms is built with. But there is also the AD2 Toolkit which is more recent. Thanks Austin Link to comment Share on other sites More sharing options...
mustafayilmaz Posted October 4, 2017 Author Share Posted October 4, 2017 Hi Austin, I have installed AD2 tool. İs there any explain document step by step? Link to comment Share on other sites More sharing options...
jpeyron Posted October 4, 2017 Share Posted October 4, 2017 Hi @mustafayilmaz, I believe that the Getting Started with LabVIEW and Analog Discovery 2 is the best document we currently have on using these VI's. cheers, Jon Link to comment Share on other sites More sharing options...
AustinStanton Posted October 4, 2017 Share Posted October 4, 2017 The link John posted above is documentation for the Digilent Waveforms VIs. I recommend that you download this package as well because it contains a lot of VI's that allow you to customize your AD2 measurements. The AD2 toolkit that you have is much simpler to use but it doesn't allow for as much tweaking, this blog post explains the difference between the two. Let me know if you have any more questions. Goodluck Austin Link to comment Share on other sites More sharing options...
mustafayilmaz Posted October 4, 2017 Author Share Posted October 4, 2017 Ok. Thanks, AD2 tool have a some error Digilent Wf tools (old tool), signal generator works fine. Do you send me basically scope read schematic? Link to comment Share on other sites More sharing options...
AustinStanton Posted October 4, 2017 Share Posted October 4, 2017 If you let me know what errors you have run into I can work on fixing them. I'm sorry I don't understand your last question, could you please rephrase it? Austin Link to comment Share on other sites More sharing options...
AustinStanton Posted October 4, 2017 Share Posted October 4, 2017 https://www.instructables.com/id/Analog-Discovery-2-USB-Oscilloscope-LabVIEW2016-Up/ That is a link to an instructable that gives information about Labforms. Labforms is an example VI that uses many parts Digilent Wf tools. Link to comment Share on other sites More sharing options...
mustafayilmaz Posted October 5, 2017 Author Share Posted October 5, 2017 This schematic works; But I don't seen any graphich. Edit : I found this guide : https://blog.digilentinc.com/waveforms-vs-labforms-part-2-the-oscilloscope/#prettyPhoto Link to comment Share on other sites More sharing options...
Question
mustafayilmaz
Labview very complicated for analog discovery.
I want to process real signals simply.
İs there any way Analog discovery scope using as analog input/output? (And digital signals)
Like this :
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.