electromotivated Posted September 13, 2017 Share Posted September 13, 2017 I'm working with the Nexys4-DDR board. I have microblaze connected to a IIC Block to control the on board ADT7420 Temperature Sensor. Is there a way to break out the I2C signals to the Pmod headers so I can debug using a DLA? Link to comment Share on other sites More sharing options...
jpeyron Posted September 13, 2017 Share Posted September 13, 2017 Hi @electromotivated, I believe to do this it requires that you make individual ports inside of the IIC interface external and then attach them to both the normal iic ports and pmod header, rather than making the entire interface external. Just "Right click on IIC and make external" will not work on its own for splitting, individual ports need to be attached to multiple bd outputs. I also believe that how you attach the I/O/T pins might matter as well hopefully you only need O. I would suggest to look at the user guide for the IIC IP core here. cheers, Jon Link to comment Share on other sites More sharing options...
Question
electromotivated
I'm working with the Nexys4-DDR board. I have microblaze connected to a IIC Block to control the on board ADT7420 Temperature Sensor. Is there a way to break out the I2C signals to the Pmod headers so I can debug using a DLA?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.