attila Posted August 8, 2017 Share Posted August 8, 2017 Dear All, The new software version can be downloaded from the following page:https://reference.digilentinc.com/waveforms3 The changelog is available here:https://reference.digilentinc.com/reference/software/waveforms/waveforms-3/change-logs/3-6-8 See this blog for more details:https://blog.digilentinc.com/software-update-waveforms-3-6-8/ Please let us know if you have any observation. Thank you, Attila Link to comment Share on other sites More sharing options...
HansV Posted August 8, 2017 Share Posted August 8, 2017 WOW version 3.6.8 is amazing, AD2 with waveforms 2015 was already the best you can get for this money but now certainly takes a lead with an impedance analyzer too! I love it compliments to DIGILENT and their hard workers. Link to comment Share on other sites More sharing options...
attila Posted August 8, 2017 Author Share Posted August 8, 2017 Thank you @HansV Link to comment Share on other sites More sharing options...
JColvin Posted August 10, 2017 Share Posted August 10, 2017 But in this particular case, just props to @attila since as far as I know, WaveForms 2015 == attila. Link to comment Share on other sites More sharing options...
HILO Posted September 30, 2017 Share Posted September 30, 2017 Dear Attila-San, I'm a Mac OS-X version Waveforms2015 with Analog Disvocery2 user. Using like this way... http://park8.wakwak.com/~hilo/audio/inst/index.html I found issues from version 3.5.4 to 3.6.8 In Network Analyzer mode following point is not working well. (even older version works correctly) - Custom One/Two graph Y-scale's "ohm" values are upside-down. Top pull-down menu value will appears at the bottom and the Bottom pull-down will appears at Top. The shape of plot is correct but the scale diameter value is not correct. I attached screen shot of this issue. Best Regards, HILO Link to comment Share on other sites More sharing options...
attila Posted October 2, 2017 Author Share Posted October 2, 2017 Hi @HILO Thank you for the observation. You are right, the scale of Network Analyzer Custom Two plot is reverse in v3.6.8 This issue is solved for the next version. I'm not sure if you have noticed but 3.6.8 brings the Impedance Analyzer interface that might be useful for your experiments. Link to comment Share on other sites More sharing options...
HILO Posted October 2, 2017 Share Posted October 2, 2017 8 hours ago, attila said: Hi @HILO Thank you for the observation. You are right, the scale of Network Analyzer Custom Two plot is reverse in v3.6.8 This issue is solved for the next version. I'm not sure if you have noticed but 3.6.8 brings the Impedance Analyzer interface that might be useful for your experiments. Thank you attila-San, The "custom one/two" feature is very useful for combined measurement system building. Link to comment Share on other sites More sharing options...
ADal Posted January 10, 2018 Share Posted January 10, 2018 Hi there, would also like to extend a very big thank you - only discovered the new version today - I'm a happy bunny! Very good work done here! Cheers, Achim Link to comment Share on other sites More sharing options...
attila Posted January 15, 2018 Author Share Posted January 15, 2018 Hi @ADal Thank you for the feedback. The next version will bring update notification. Link to comment Share on other sites More sharing options...
Question
attila
Dear All,
The new software version can be downloaded from the following page:
https://reference.digilentinc.com/waveforms3
The changelog is available here:
https://reference.digilentinc.com/reference/software/waveforms/waveforms-3/change-logs/3-6-8
See this blog for more details:
https://blog.digilentinc.com/software-update-waveforms-3-6-8/
Please let us know if you have any observation.
Thank you,
Attila
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.