Hi - I just tried to install the XUP USB-JTAG Programming Cable from diligent.
I also have a Diligent Programming Cable.
Centos can see both cables (see below)
Vivado can see the Diligent programming cable but not the Xilinx one. Given the physical constraints of the installation only the Xilinx one will work.
Are there any specific instructions to get the Xilinx cable going?
$lsusb | grep "Xilinx/|Future"
Bus 002 Device 003: ID 03fd:000d Xilinx, Inc.
Bus 001 Device 006: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Question
dec
Hi - I just tried to install the XUP USB-JTAG Programming Cable from diligent.
I also have a Diligent Programming Cable.
Centos can see both cables (see below)
Vivado can see the Diligent programming cable but not the Xilinx one. Given the physical constraints of the installation only the Xilinx one will work.
Are there any specific instructions to get the Xilinx cable going?
$lsusb | grep "Xilinx/|Future"
Bus 002 Device 003: ID 03fd:000d Xilinx, Inc.
Bus 001 Device 006: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.