Tutorial for SPI communication on Arty

[Edwin_Sun]

Hi, I am new to FPGA. I have a data sampling device that supports SPI communication as slave. I purchased one Arty, and try to make Arty as the SPI master, get the data and do some analysis. 

Are there some tutorials or demos that can help me to realize this function?

Thanks a lot!

Edwin

[jpeyron]

Hi @Edwin_Sun,

Unfortunately, we do not have tutorials for the different communication types. You can look at the different Pmods that we have here. Here is an example of a project done in vhdl that connects the PmodAD1(two channel spi). We have an IP core typically used with microblaze you can use as a reference here for the PmodAD1 that only uses one of the channels so it is a little more basic spi communication.

cheers,

Jon 

[jpeyron]

Hi @Edwin_Sun,

I did some google searches and here, here and here might be helpful spi tutorials as well.

cheers,

Jon

[Edwin_Sun]

On ‎7‎/‎8‎/‎2017 at 7:01 AM, jpeyron said:

Hi @Edwin_Sun,

I did some google searches and here, here and here might be helpful spi tutorials as well.

cheers,

Jon

Hi Jon,

Thanks a lot for your help. Right now, I am trying to learn these tutorials.

Regards,

Edwin