Hendrik Posted July 3, 2017 Share Posted July 3, 2017 Looking for a quick small script(Matlab or Python) to test serial communication between the ProMx7 and Matlab,can anyone help? Thanks H Link to comment Share on other sites More sharing options...
jpeyron Posted July 5, 2017 Share Posted July 5, 2017 Hi @Hendrik, Unfortunately, I haven't found anything that could help with this. I have reached out to coworkers to see if they have any input. Hopefully one of the more experienced forum members will have some input for this. cheers, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted July 6, 2017 Share Posted July 6, 2017 Hi @Hendrik, I would also suggest reaching out to the Matlab forums here as well. cheers, Jon Link to comment Share on other sites More sharing options...
BTTroyer Posted August 11, 2017 Share Posted August 11, 2017 Hi - On the Matlab end look at https://www.mathworks.com/help/matlab/matlab_external/getting-started-with-serial-i-o.html?s_tid=gn_loc_drop On the MX7 you can use the USB serial interface, but the other uarts are 0-5 volt - NOT the same as an RS-323 port on the PC. Hope this helps. Bill Link to comment Share on other sites More sharing options...
Question
Hendrik
Looking for a quick small script(Matlab or Python) to test serial communication between the ProMx7 and Matlab,can anyone help?
Thanks
H
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.