I have a design with many Xilinx FPGAs in a JTAG chain and everything works well with the JTAG-SMT2 module. I have another design that needs a CPLD for some glue logic that is sophisticated enough and the power supply constraints are such that I ended up with an Altera part. There is not a similar device available for Intel/Altera parts. I don't need to do Signal Tap or anything complicated that would require the use of Quartus. Is it possible to configure an Altera CPLD from Impact using a JTAG-SMT2? Maybe there is a file conversion utility?
Question
ninaleechie
I have a design with many Xilinx FPGAs in a JTAG chain and everything works well with the JTAG-SMT2 module. I have another design that needs a CPLD for some glue logic that is sophisticated enough and the power supply constraints are such that I ended up with an Altera part. There is not a similar device available for Intel/Altera parts. I don't need to do Signal Tap or anything complicated that would require the use of Quartus. Is it possible to configure an Altera CPLD from Impact using a JTAG-SMT2? Maybe there is a file conversion utility?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.