BobS Posted June 7, 2017 Share Posted June 7, 2017 My Analog Discovery 2 / Waveforms will not open on one of my two PC's. It has opened on both in the past. When I open Waveforms I get the following error message on the pop-up: Comments: Not supported (screen capture attached) Also, I can get the demo mode to run. Your assistance in resolving this problem will be appreciated. Thanks, Bob Link to comment Share on other sites More sharing options...
jpeyron Posted June 7, 2017 Share Posted June 7, 2017 Hi @BobS, Is this Waveforms 2015? My device manager looks very different from yours. I have attached a screen shot below. cheers, Jon Link to comment Share on other sites More sharing options...
BobS Posted June 7, 2017 Author Share Posted June 7, 2017 Hi Jon, No, PC-2 is running Waveforms 2014 version (2.7.5.0). It turns out that I had just opened my other PC (call it PC-1) and saw that it is running Waveforms 2015 (3.4.7) 64 bit. I did this at almost the same moment I saw your reply. I'm now going to update PC-2 to Waveforms 2015. Hope this solves the problem. Thanks for your reply, Bob Link to comment Share on other sites More sharing options...
BobS Posted June 7, 2017 Author Share Posted June 7, 2017 Hi Jon, That was the problem, Waveforms 2015 has it working. thanks, Bob Link to comment Share on other sites More sharing options...
Question
BobS
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.