ilcieloblu Posted April 18, 2017 Share Posted April 18, 2017 Hi all, is it possible to use the Pmod modules on chipKIT Max32? Specifically, the Pmod HB5 motor driver? Any info, links, examples... would be really helpful. Thanks! Link to comment Share on other sites More sharing options...
jpeyron Posted April 19, 2017 Share Posted April 19, 2017 Hi @ilcieloblu, I believe you can use the chipkit max32 with the Pmod HB5 motor driver with no issue but i will confirm this in the morning. Here is the resource page for the PmodHB5. The resource page has an MPLABX and an MPIDE library that will work for the ChipKit MAX32. Unfortunately this library uses plib.h so would not be compatible with the Arduino IDE. cheers, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted April 19, 2017 Share Posted April 19, 2017 Hi @ilcieloblu, I have confirmed that there is no issue with using the PmodHB5 and the ChipKit MAX32. Since the chipKit MAX32 does not have a Pmod Port you will need to wire it to the board yourself as well as making some changes to the pins being used due to the library using the Cerebot 32MX4cK. Here is the resource page to the ChipKit MAX32. cheers, Jon Link to comment Share on other sites More sharing options...
Question
ilcieloblu
Hi all, is it possible to use the Pmod modules on chipKIT Max32? Specifically, the Pmod HB5 motor driver? Any info, links, examples... would be really helpful. Thanks!
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.