alesea Posted March 31, 2017 Share Posted March 31, 2017 Please check the VHDL source for the PMODOLED. It has no example for BASYS3 board, which would be great to have updated to work with Vivado. Austin Lesea Link to comment Share on other sites More sharing options...
jpeyron Posted March 31, 2017 Share Posted March 31, 2017 Hi @alesea, Unfortunately, we do not have a VHDL example for the Basys 3. You should be able to take the VHDL nexys 3 code on the PmodOLED resource page here and use it for the Basys 3 in vivado. The major difference would be to change the nexys 3 ucf to a basys 3 xdc while using the nexys 3's ucf as a reference for the xdc. We do also have IP's available for a lot of our Pmods like the PmodOLED at our github here. If you are not familiar with Microblaze then i would suggest to go through the getting started with Microblaze tutorial here. To use the IP i would follow the getting started tutorial and where it has you add the uartlite also add the PmodOLED. You will also need to made one more output clock from the clocking wiz at 50 Mhz and connect the ext_spi_clk to the additional clock. Everything else should be the same in vivado. We are uptating the Pmod IP tutorial but it is also a good reference here. cheers, Jon Link to comment Share on other sites More sharing options...
Question
alesea
Please check the VHDL source for the PMODOLED. It has no example for BASYS3 board, which would be great to have updated to work with Vivado.
Austin Lesea
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.