Sberry Posted March 29, 2017 Share Posted March 29, 2017 I'm using DA4 and OD1 PMod boards in a project. We will have quite a few add-on boards in the device, and I want to get placement nailed down. Is it possible to get a 3D CAD model (.step, .iges, etc.) for them? Many Thanks, -Sberry Link to comment Share on other sites More sharing options...
jpeyron Posted March 29, 2017 Share Posted March 29, 2017 Hi @Sberry, I have reached out to get the 3d model for you. It might take a few days to get it for you. cheers, Jon Link to comment Share on other sites More sharing options...
Sberry Posted March 30, 2017 Author Share Posted March 30, 2017 @jpeyron Awesome. Thanks for your help. Look forward to hearing back. -Sberry Link to comment Share on other sites More sharing options...
jpeyron Posted April 4, 2017 Share Posted April 4, 2017 @Sberry, I have attached the 3D models for the PmodDA4 and PmodOD1 below. Currently these models include the major components only, the IC’s and similar small components are not included. cheers, Jon Pmod_OD1.stp Pmod_DA4.stp Link to comment Share on other sites More sharing options...
Sberry Posted April 4, 2017 Author Share Posted April 4, 2017 @jpeyron, Thank you for your help. These models look great! The EE design engineer informed me that we'll be using Pmod AD1 as well. I think the model is basically the same (two channels instead of four on the connector). If you have that model readily available, it would be great to have, but it isn't a big deal, since I think they are pretty much the same size. Thanks again, sberry Link to comment Share on other sites More sharing options...
jpeyron Posted April 4, 2017 Share Posted April 4, 2017 Hi @Sberry, I did not find a 3D model of the PmodAD1 readily but I have reached out to our mechanical engineer to see if we do. I will respond here with their response. cheers, Jon Link to comment Share on other sites More sharing options...
Sberry Posted April 4, 2017 Author Share Posted April 4, 2017 @jpeyron, Thanks for your help. If we find additional boards that we will be using, is there someone I should reach out to directly, or is this forum the best way to get models? We currently know that we will be using: chipKIT Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board (410-302) Pmod IA: Impedance Analyzer (410-246) For both of these, I'll need models as well. Link to comment Share on other sites More sharing options...
jpeyron Posted April 13, 2017 Share Posted April 13, 2017 Hi @Sberry, Here is the resource page for the chipkit wi-fire which has the eagle project attached. I have reached out to get the 3d model for the PmodIA which could take a could of days. cheers, JOn Link to comment Share on other sites More sharing options...
jpeyron Posted April 18, 2017 Share Posted April 18, 2017 Hi @Sberry, Here are the 3D models for the PmodDA1 and PmodIA you asked for. cheers, Jon RE%3a_3D_Models.zip Link to comment Share on other sites More sharing options...
Question
Sberry
I'm using DA4 and OD1 PMod boards in a project. We will have quite a few add-on boards in the device, and I want to get placement nailed down. Is it possible to get a 3D CAD model (.step, .iges, etc.) for them?
Many Thanks,
-Sberry
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.