ogrebass Posted March 25, 2017 Share Posted March 25, 2017 I would like to use an external power supply with my Analog Discovery 2. Is it safe to use a 4.5V or 6V 300mA wall wart? Link to comment Share on other sites More sharing options...
attila Posted March 26, 2017 Share Posted March 26, 2017 Hello, https://reference.digilentinc.com/reference/instrumentation/analog-discovery-2/reference-manual Link to comment Share on other sites More sharing options...
GaborG Posted December 17, 2018 Share Posted December 17, 2018 Hi, I connected up the AD2 to RaspberryPi 3B+ and using an external 5V 3A power supply through a 2.1mm jack (TENMA bench PSU) but still got the error messages: "Auxiliary supply undervoltage (3.14V) Please connect 5V DC 2.5 switching PSU" I got the scope section working, but when I turn the Waveform generator on the error comes up. Any suggestion? Many thanks (koszi) Gabor Link to comment Share on other sites More sharing options...
attila Posted December 17, 2018 Share Posted December 17, 2018 Szia @GaborG Unfortunately Analog Discovery and Digital Discovery are not working with RaspberryPI. Link to comment Share on other sites More sharing options...
G_Nome Posted November 28, 2019 Share Posted November 28, 2019 Link to comment Share on other sites More sharing options...
attila Posted November 28, 2019 Share Posted November 28, 2019 Hi @G_Nome Finally, the latest Raspberry PI 4 B is compatible with the FTDI chips, it is working well with Analog and Digital Discovery. Link to comment Share on other sites More sharing options...
Question
ogrebass
I would like to use an external power supply with my Analog Discovery 2. Is it safe to use a 4.5V or 6V 300mA wall wart?
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.