jump Posted March 14, 2017 Share Posted March 14, 2017 Hi, I'm searching for technical documentation, that provides dimensioned drawings or even gerberfiles for the Nexsys Video evaluation board. Is this information accessible anywhere? Link to comment Share on other sites More sharing options...
Bianca Posted March 14, 2017 Share Posted March 14, 2017 Hello, Attached here you'll find the drawing of the Nexys Video. Unfortunately, we can't release the gerbers. Best regards, Bianca Nexys Video_dimensions.PDF Link to comment Share on other sites More sharing options...
jump Posted March 14, 2017 Author Share Posted March 14, 2017 Thank you! Link to comment Share on other sites More sharing options...
jump Posted March 14, 2017 Author Share Posted March 14, 2017 I just realized, that the dimensions we require unfortunately can not be deduced from the document. Are there additional drawings you could provide? More specifically: we need the positions of the connector J1 relative to the adjacent attachement drill-holes in x- and y-direction. Best regards Jan Link to comment Share on other sites More sharing options...
Bianca Posted March 14, 2017 Share Posted March 14, 2017 @jump, I'm not sure what exactly do you mean. You are referring to the drill holes from the boards corner? I'll make you a new drawing but tell me exactly what do yo need and the measuring units. In the picture below I added the distance from the connector center to the drilling holes in inches. If this is not what you need, please explain again. The position of the holes is given relative to the board margins. Regards, Bianca Capture.zip Link to comment Share on other sites More sharing options...
jump Posted March 14, 2017 Author Share Posted March 14, 2017 Thank you for your fast response. Actually I was referring to the position of the drilling holes next to the connector. In the first document you sent, we could determine their y-position relative to the connector, but not the relative x-position. Is that hopefully a bit clearer? Link to comment Share on other sites More sharing options...
jpeyron Posted March 14, 2017 Share Posted March 14, 2017 Hi @jump, Here is a step file for the Nexys Video. The only part that is not fully accurate in the step file are the pins in the FMC connector. Let us know if this works for you. Cheers, Jon Nexys_Video.stp Link to comment Share on other sites More sharing options...
Question
jump
Hi,
I'm searching for technical documentation, that provides dimensioned drawings or even gerberfiles for the Nexsys Video evaluation board.
Is this information accessible anywhere?
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.