Jump to content
  • 0

GYRO on basys 2


Mqasimag

Question

Dear Digilent team and members,

I'm using the basys 2 for a school project with the GYRO pMod. I downloaded this example (GYRO pmod Demo) that was designed for Nyxsys 3.Now, I am having trouble configuring it to my Basys 2, Mainly with header pin connections, the Nexys 3 has 12 pin banks while the basys 2 has 6 pin Banks. Any advice is very appreciated. 

Thank you

M. Q. Agha 

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

Hello,

You are probably going to have to use one of these cables(below) to get all your pins accounted for. In your UCF file you will just need to rename the pins on the second port to the bottom row pins on the nexys 3.

http://store.digilentinc.com/2x6-pin-to-dual-6-pin-cable/

Another thing to consider is if you want the pins that are on the bottom row at all. (It only includes the 2 configurable interrupts) The top row has your spi bus.

-Sam

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...