Andy Roy Posted March 3, 2017 Share Posted March 3, 2017 Documentation on the NetFPGA-1G-CML (Reference Manual for rev E revised July 16, 2014) says that the FMC connector can support SATA II data rates. I believe that this means 3 Gb/s. Can it also support SATA III (6 Gb/s)? Link to comment Share on other sites More sharing options...
Bianca Posted March 3, 2017 Share Posted March 3, 2017 Hi Andy, From the FMC standard it says that: " The connector is designed to support single-ended and differential signaling up to 2 Gbps and signaling to an FPGA's Multi-Gigabit Transceivers (MGTs) up to 10 Gbps. " Best regards, Bianca Link to comment Share on other sites More sharing options...
Question
Andy Roy
Documentation on the NetFPGA-1G-CML (Reference Manual for rev E revised July 16, 2014) says that the FMC connector can support SATA II data rates. I believe that this means 3 Gb/s. Can it also support SATA III (6 Gb/s)?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.