daveoprea Posted January 31, 2017 Share Posted January 31, 2017 Has anybody had ;any success with using LabVIEW with Raspberry Pi and a pmod? Link to comment Share on other sites More sharing options...
jpeyron Posted January 31, 2017 Share Posted January 31, 2017 Hi daveoprea, Here is an instructable that uses the Raspberry Pi 2 labVIEW and PmodJSTK2. Here is a Github for Linx and Raspberry PI 2 and support for many of the Pmods. cheers, Jon Link to comment Share on other sites More sharing options...
daveoprea Posted January 31, 2017 Author Share Posted January 31, 2017 Thank you, Jon. Do you have any guidance on how to wire a pmod AD1 (SPI interface) to a Raspberry Pi 3? Link to comment Share on other sites More sharing options...
jpeyron Posted February 1, 2017 Share Posted February 1, 2017 Hi Daveoprea, Here is a link to Adding Support for a New LINX Remote I/O Device like the PmodAD1 off of the LabVIew MakerHub with their home page here. I would also suggest using their forums for help getting the PmodAD1 working in LINX. They have alread written support for multiple Pmods based on the link here. cheers, Jon Link to comment Share on other sites More sharing options...
Question
daveoprea
Has anybody had ;any success with using LabVIEW with Raspberry Pi and a pmod?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.