phd1401102002 Posted December 22, 2016 Share Posted December 22, 2016 Hii All, Can I use AD-9266-80ebz evaluation board standalone with the basys-3 or zybo board. If yes, than what connectors I need to interface these boards. What is the maximum data rate that high speed Pmod connectors can support in zybo or basys-3. thank you for your help. Abhijeet Link to comment Share on other sites More sharing options...
Bianca Posted December 22, 2016 Share Posted December 22, 2016 Hi @phd1401102002, I am not sure if you can use it. I saw that it communicates through SPI so a SPI communication can be implemented between them. If you need to connect the data bus from the HM-ZD connector, i'm not sure if you can find an adapter. On a quick search, I couldn't find anything. Regarding the PMOD, it is not a standard and we didn't test it to its maximum data rate. It depends very much on your application. We saw them working at 10MHz. If you need more you can test them with your project and see if they can communicate at that speed. Best regards, Bianca Link to comment Share on other sites More sharing options...
Question
phd1401102002
Hii All,
Can I use AD-9266-80ebz evaluation board standalone with the basys-3 or zybo board. If yes, than what connectors I need to interface these boards. What is the maximum data rate that high speed Pmod connectors can support in zybo or basys-3.
thank you for your help.
Abhijeet
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.