Jump to content
  • 0

chipKIT Cmod Pin-Map--- suggestions?


LariSan

Question

3 answers to this question

Recommended Posts

Hi LariSan,

 

I think it looks pretty good.  There are only two other things that I would want to know when looking at this diagram, although I don't know if a pinmap diagram is designed to/ purposed for these things.

 

The first thing I would want to know know in terms of signals is where the major communication pins are (that go with the default communication protocol on the PIC32MX150) such as SPI, I2C, and UART.

 

The second thing, which ties in with the first, is what pins are specifically available on each of the Pmod headers and where they are located. For example, Header J1 has the default SPI port, as well as an external interrupt on DIP pin 7, and header J2 has the UART2 pins, a pwm capable pin, and SPI2 pins.

 

Thanks,

JColvin

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...