Jump to content
  • 0

Cmod S6 Outline Dimensions


peason

Question

I am looking for outline dimensions for the Cmod S6.  Not in the users guide on on the web page.  They should be on the website.  PDF, PNG, anything would be fine.

 

I assume that this board fits in a 48 pin DIP socket which has holes on 0.1inch centers and 0.6inch spacing.  Is this correct?

 

Would also like to know if the USB port is on the centerline of the board or offset.

 

 

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

Hi peason,

 

Yes, the Cmod S6 will fit in a standard 48 pin DIP socket. According to the Overview section in the Reference Manual "There are 46 FPGA I/O signals [and a pair of Vcc and Ground] that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards".  

 

Also, the USB port is placed on the centerline of the board. 

 

Let me know if you have any more questions.

 

Thanks,

JColvin

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...