ATMEL USB firmware

[vijay 0]

Hi,

I am looking for firmware of USB controller used in the following board. Where can I download it?

https://store.digilentinc.com/coolrunner-ii-cpld-starter-board-limited-time/

[Bianca 105]

Hello vijay,

I will give you the firmware. We'll talk more about it in the private messenger.

Best regards,

Bianca

[shanshe 0]

@Bianca, please I need your help. I'm associated professor of the University of Seville (Spain). We have used 15 boards of Digilent (coolrunner-II) for my electronic classes. This year we have upgraded the computers, and I installed latest version of adept. As result, the firmware of the AT90USB162 have been corrupted and no more I can program via USB.

Some of the boards were not used, and obviously not broken. On these boards, I have tried to read the firmware, in order to restore the firmware on broken boards, but it seems to be protected.

Please, could you provide me the firmware of the USB micro controller (for the rev f)?.

Thank you in advance!

[Bianca 105]

Hi @shanshe,

You'll have a private message as well.

Best regards,

Bianca

[Grensv 0]

Hello,

I am having the exact same problem as Vijay, I need the firmware for the ATMEL usb chip of the board. I have already installed the Digilent flash tool, and try to get the firmware from a functional board, but it is of course read protected.

Best regards,

Vincent.

[JColvin 400]

Hi @Grensv,

I personally do not have this firmware, but I have tagged @Bianca who will be able to provide the information you need in a private message.

Thanks,
JColvin