Nexys 4 Programming

[nia]

Greetings,

 

I'm trying to get a Nexys board working on my setup {Windows 7, Xilinx ISE 12.3, Adept 2.2}, and been having some issues so far. Mainly with getting the board recognized.

 

I first wanted to confirm whether Nexys 4 is actually supported by Adept? I re ad in another forum that it is not.

 

I tried also to get the tool recognized by Xilinx iMPACT. I downloaded the Digilent Xilinx Plugin and installed it inline with the instructions. But iMPACT seems not to recognize the Digilent Cable Plugin. Whenever I try to connect, I get the following error

 

ERROR: Could not open plug-in of then type: digilent_plugin. Please check to make sure the correct plug-in for this type is installed.

 

Would really appreciate your help with the issues above.

 

Thanks,

 

 

 

 

[attila]

Hello,

 

The latest version of Adept Application can program Nexys4/Artix7.

https://www.digilentinc.com/Products/Detail.cfm?NavPath=2,66,828&Prod=ADEPT2

 

The latest version of Xilinx ISE 14.7 supports Artix7 on Nexys4.

The installer of plugin to support Digilent boards/cables from iMpact and Chipscope can be found in Xilinx ISE installation, like:

C:Xilinx14.7ISE_DScommonbinntdigilentinstall_digilent.exe

 

The Digilent support plugin is embedded in Vivado.