ov7670 programming based on Digilent Nexys3

[Ardelle Froeliger]

I am looking for the ov7670 programming on Digilent Nexys3. I have read an ov7670 article before.

https://www.stoneitech.com/application/civil-electronic/ov7670-camera-module-connection-with-stone-display-module.html

It would be good to have detailed steps like how to connect ov7670 to Digilent Nexys3, how to sample it, how to show it in the monitor, and preferably an example of the design in ise.

[JColvin]

Hi @Ardelle Froeliger,

The Nexys 3, along with the vast majority of the boards that Digilent previous made that were only able to be targeted by ISE, have been retired so unfortunately Digilent will not be doing any more development work with those boards. All of the materials that Digilent has previously created for the Nexys 3 are available for legacy purposes on it's Resource Center though: https://reference.digilentinc.com/programmable-logic/nexys-3/start.

Thanks,
JColvin

[Ardelle Froeliger]

This is such a shame!

[thinkthinkthink]

There is a much better guide out there: this one made by Lauri Võsandi.

I've got it working on the old Digilent ZYBO board (the non Z7 version that had a VGA connector).

Maybe you can get it working somehow. Good luck, you'll need it.