vsingh.ce Posted January 24, 2021 Share Posted January 24, 2021 Dear Forum Members I need to fuse the output of accelerometer operating at 20 Hz sampling and GNSS module operating at 1 Hz . Can I use Digital Discovery module for that purpose? Regards Varun Singh Link to comment Share on other sites More sharing options...
JColvin Posted January 29, 2021 Share Posted January 29, 2021 Hi @vsingh.ce, The Digital Discovery could be used for this purpose, though I would instead recommend using a different type of system board such as a microcontroller or an FPGA to do this as they will be a little better suited towards processing the data from both of those modules. Let me know if you have any questions about this. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
vsingh.ce
Dear Forum Members
I need to fuse the output of accelerometer operating at 20 Hz sampling and GNSS module operating at 1 Hz . Can I use Digital Discovery module for that purpose?
Regards
Varun Singh
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.