Nikhil Posted December 3, 2020 Share Posted December 3, 2020 Hello Everyone, I am trying to debug a high speed embedded application with DIO operations and I need to continuously monitor and log the logic levels of DIO. Is there a way to acquire continuous logic signals for the high speed DIO using WaveForms with Digital Discovery? I would appreciate a quick response on this. Thanks Nikhil Chaudhari Link to comment Share on other sites More sharing options...
attila Posted December 9, 2020 Share Posted December 9, 2020 Hi @Nikhil For high number of samples it is recommended to use the Record mode. The input mode can be selected for instance to be 800MHz/8bits on DIO or DIN lines and the Samples/Rate configured. Link to comment Share on other sites More sharing options...
Question
Nikhil
Hello Everyone,
I am trying to debug a high speed embedded application with DIO operations and I need to continuously monitor and log the logic levels of DIO.
Is there a way to acquire continuous logic signals for the high speed DIO using WaveForms with Digital Discovery?
I would appreciate a quick response on this.
Thanks
Nikhil Chaudhari
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.