I failed to start my SUME properly and found that some resistors and capacitors were missing, but the model number and resistance value were not marked on the schematic diagram, which bothered me.I don't know if they're soldered on the back, the back is blocked by the radiator.
Question
Leo_W
Hi digilent，
I failed to start my SUME properly and found that some resistors and capacitors were missing, but the model number and resistance value were not marked on the schematic diagram, which bothered me.I don't know if they're soldered on the back, the back is blocked by the radiator.
Thanks!
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.