Creating Signals from Captured Protocols

[rblades1959]

I would like to be able to capture signals or protocols with my Analog Discovery 2 using Logic (in Waveforms) and then send them to devices for testing. For example, if I was testing a USART in asynchronous mode I would like to be able to send TTL-RS232 data to it to test the receiving operation. I imagine capturing a sequence that was transmitted in this format in Logic and then saving that captured data in Logic and being able to send it another device to test the receiving function and software. 

Is it already possible to do that using expert from Logic and then importing it into Patterns or is there and easier way to do this that is escaping me?

Thanks,

Bruce Schreiner

schreiner@stevenscollege.edu

[attila]

Hi @rblades1959

You could use the Script tool to configure and transfer data from on instrument to another.
Select the 4th device configuration to have 16k logic and pattern device buffer.

Patterns.Channels.DIO7.custom = Logic.Channels.DIO0.data
Patterns.Channels.DIO7.Frequency.value = Logic.Time.Rate.value