bitstre@m Posted September 14, 2020 Share Posted September 14, 2020 Hello, I'm using AD2 with Labview and I am wondering if there's way to set the trigger level for trig/1 or trig/2 inputs. I don't want to use the analog channels for triggering, since I am using them for capturing. Thanks Link to comment Share on other sites More sharing options...
attila Posted September 15, 2020 Share Posted September 15, 2020 Hi @bitstre@m Yes, you can set it with VIs or WF SDK Link to comment Share on other sites More sharing options...
bitstre@m Posted September 15, 2020 Author Share Posted September 15, 2020 Hi Attila, Yes that's how I set trig/1 as the source and the slope but I don;t see how to set the level (threshold). For example, 1.5V or 0.9V. Thanks Link to comment Share on other sites More sharing options...
attila Posted September 16, 2020 Share Posted September 16, 2020 Hi @bitstre@m With the VIs only the first device configuration is available in which the digital input threshold is ~1.5V Eventually you could call the FDwfDeviceConfigOpen(-1, 4, &hdwf) C function, before calling the MSO Initialize VI. In the 5th (idx 4) AD configuration the threshold is ~0.5V Link to comment Share on other sites More sharing options...
Question
bitstre@m
Hello,
I'm using AD2 with Labview and I am wondering if there's way to set the trigger level for trig/1 or trig/2 inputs.
I don't want to use the analog channels for triggering, since I am using them for capturing.
Thanks
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.