Getting Started with Vivado + Cora Z7-07S

[S.Kamath]

Hi,

I'm new to Xilinx Zynq-7000. I'm having Digilent Cora Z7-07S board.

I'm able to run LED bink program by following "Getting Started with Vivado" page. Is similar link (web page) is available which explains (step-by-step procedure) LED blink program from ARM Cortex-A9 processor? (i.e., ARM Cortex-A9 processor ---> LED) using Xilinx Vitis 2020.1?

[JColvin]

Hi @S.Kamath,

Yes, you can use our guide here, https://reference.digilentinc.com/learn/programmable-logic/tutorials/2020.1/getting-started-with-ipi, for using the Zynq processor to control an LED on a Zynq based board such as the Cora Z7-07S.

Let me know if you have any questions.

Thanks,
JColvin

[S.Kamath]

Thanks JColvin .. I appreciate your prompt response..!!