Jump to content
  • 0

Zybo 07-10


confusedengr

Question

Im am brand new at Zybo products and Fpgas as a whole. 

The project that I am currently working on has me using the Zybo 07-10. 

Using this FPGA I need to 

-power a device using PWM 

-read a temp sensor using either I2c Digital interface

-and power a camera device that has two different power needs (3.3v and 1.8v)

my initial thought is to use the Pmod ports but the difference in the types of Pmod ports is what is confusing me. 

What are the MIO, high speed,  Xadc ports and what are the technical differences.

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

Hi @confusedengr,

The different Pmod ports on the Zybo Z7 are described in the Zybo Z7 Reference Manual starting here:

https://reference.digilentinc.com/reference/programmable-logic/zybo-z7/reference-manual#standard_pmod.

In terms of powering a camera that has two different power needs though, the Zybo Z7 does not have any readily available 1.8V power rails. But you would be able to provide a PWM output or communicate with a device over I2C (though the Pmod ports all run at 3.3V).

Let me know if you have any questions.

Thanks,
JColvin

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...