Cora 7 Jtag connections

[Testcards101]

I wish to drive the JTAG signals by fitting a connector in J13 on the card. Can you confim that if I power the Cora 7S card via the external psu with 5V and leave the USB shown as "3 Shared USB JTAG / UART port" in the reference manul the FTDI chip will not cause contention on the signals.

I am unable to confirm this as I guess that the circuit for this section is on the page which has been left blank.

Thanks

[JColvin]

Hi @Testcards101,

I checked and confirmed that you may use the JTAG port J13, the USB-UART, and the external power connector simultaneously with no issues with cross-powering or something like that.

Let me know if you have any questions about this.

Thanks,
JColvin