Any help with IMX477 datasheet for Zybo Z7 adaptation

[hellgate202]

Hello everyone.

Guess most of you heard that RPI produced new HQ camera with IMX477 sensor. I would like to connect it to Zybo Z7 board via FPC cable, since they are pin-to-pin compatible.

If anyone has any datasheets, register maps or can at least provide answers to specific questions, please contact me hellgate.azuregos@gmail.com

The project will be opensource and will be published on my github https://github.com/hellgate202

Sorry in advance if this post violates any rules of the forum.

[JColvin]

Hi @hellgate202,

I'm not certain if there is any datasheet readily available yet, or at least that seems to be the case based on this forum thread over on the Raspberry Pi forums: https://www.raspberrypi.org/forums/viewtopic.php?t=272926. Digilent hasn't done anything with that particular camera so we do not have it's datasheet.

Thanks,
JColvin

[hellgate202]

I've got a little update on this project. I managed to get this thing running, by using modified register settings from raspiraw repository on github. So it is definitely possible to use this camera with Zybo Z7-20 board. However I did this with my own MIPI receiver, didn't check compatibility with Xilinx IP-core. Following image is only with white balance correction.