jamesbuchanan1220@comcast.

Unable to get HS2 to Connect with CMOD A6

Recommended Posts

Due to the nature of my project, I need to program the cmod a6 with the use of a JTAG programmer. I have a HS2, which is configured AND recognized by iMPACT AND Adept. Unfortunately, when I attempt to program the cmod a6 board, I get the following:

// *** BATCH CMD : Program -p 1 -dataWidth 4 -spionly -e -v -loadfpga 
INFO:iMPACT:583 - '0': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '0':  Device IDCODE :        00001111111111111111111111111111
INFO:iMPACT:1579 - '0': Expected IDCODE:    00000100000000000000000010010011
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :        00001111111111111111111111111111
INFO:iMPACT:1579 - '1': Expected IDCODE:    00000100000000000000000010010011
PROGRESS_END - End Operation.
Elapsed time =      0 sec.

When I use Adept, I get this:

===== Digilent Adept  =====
  Adept System  Rev 2.7
  Adept Runtime Rev 2.20
  Adept Application Rev 2.4.2
Copyright © 2010
Loading board information...
Warning:  Could not find specific board information
Initializing Scan Chain...
Default information loaded.
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Initialization Failed.
------------------------------------------------------------------

I've soldered the header to the J4 holes on the CMOD A6 correctly. I know that this board work because I've programmed it when I connected it DIRECTLY to my Windows laptop's usb port, by way of cable. 

Am I missing a file? I did put the DLL files in the proper place and was able to have iMAPCT able to see the HS2's SN.

Why is this not working? 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now