kiwiliz Posted May 8, 2020 Share Posted May 8, 2020 Hi, I'm following these steps: https://www.digikey.com/eewiki/display/LOGIC/Digilent+Arty+A7+with+Xilinx+Artix-7+Implementing+SiFive+FE310+RISC-V Ubuntu 18.04. Vivado 2019.2. Arty A7 35T. Olimex ARM-USB-OCD-H. Cables are placed correctly. Steps are correctly but the last doesn't work. But when I try to do the step Vivado Installing Configuration to Device, Vivado doesn't recognize my Arty. The drivers and lsusb: I think the problem is the FT2232 EEPROM, how can I restore it? Any help, please? That's all, if you need more information tell me. Thanks Link to comment Share on other sites More sharing options...
JColvin Posted May 8, 2020 Share Posted May 8, 2020 Hi @kiwiliz, I can't readily tell based on the console output, but I presume you installed the cable drivers as root? Otherwise, some things that I would try would be to use a different USB Cable (you'd be surprised at how often that ends up being the case) and a different USB port/computer. Are you able to see detect the board via Adept (https://reference.digilentinc.com/reference/software/adept/start, you'll need both the runtime and utilities) when you run 'djtgcfg enum' in a terminal? Let me know if you have any questions. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
kiwiliz
Hi,
I'm following these steps: https://www.digikey.com/eewiki/display/LOGIC/Digilent+Arty+A7+with+Xilinx+Artix-7+Implementing+SiFive+FE310+RISC-V
But when I try to do the step Vivado Installing Configuration to Device, Vivado doesn't recognize my Arty.
The drivers and lsusb:
I think the problem is the FT2232 EEPROM, how can I restore it? Any help, please? That's all, if you need more information tell me. Thanks
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.