Step missing from FPGA bootloader tutorial?

[FlyingBlindOnARocketCycle]

This tutorial has you create an application project in the SDK but I don't see where it tells you to export the hardware design from Vivado.  Am I missing something?

[Ana-Maria Balas]

I will bring this into the attention of the person who create the tutorial.

Though I think the author thought that this is already explained in the Getting started tutorial and that is why he omitted.

Thank you

[Ana-Maria Balas]

Yes, it tells you from step 0.1) to 0.6)

Also "Before you start; this guide assumes that you already have a Microblaze system built complete" so it assumes that you already know how to export your hardware and create your SDK application.

This is the first tutorial for Getting Started with Microblaze: https://reference.digilentinc.com/nexys/nexysvideo/gsmb

[FlyingBlindOnARocketCycle]

Hi @Ana-Maria Balas

Thanks for bringing the microblaze tutorial to my attention.  You have helped me recently with a Xilinx microblaze tutorial, Lab 4, UG940.  I will study the digilent link you provided as I notice digilent tutorials usually have more details than a Xilinx tutorial.

When I re-read the steps you mention ,0.1 -0.6, I do wonder if there should be a step 0.7?  Should the tutorial say to export the hardware design with the bitstream included?