Shani Kleinman Posted March 10, 2020 Share Posted March 10, 2020 Hi, We are trying to use Metaware debugger with Digilent JTAG-HS2 cable HS2 for JTAG connection. OS is Ubunto-18. we've installed driver ( runtime and utilities from https://reference.digilentinc.com/reference/software/adept/start?redirect=1#software_downloads) when performing >> lsusb -we see the device . when performing >> djtgcfg enum return: Found 1 device(s) Device: JtagHs2 Product Name: Digilent JTAG-HS2 User Name: JtagHs2 Serial Number: 210249ACD43 when running with MetaWeare debugger we get the following msg: "Could not load libdjtg.so." we try to add the dir to LD_LIBRARY_PATH but results is the same. any idea what are we missing? Thanks Shani Link to comment Share on other sites More sharing options...
Shani Kleinman Posted March 12, 2020 Author Share Posted March 12, 2020 Update: Installed 32-bit driver solve the issue. we now facing the following errors: [DIGILENT] This device supports JTAG7 scan formats. [DIGILENT] Device enumeration: #0 is `JtagHs2'=Digilent JTAG-HS2=SN:210249ACD434. [DIGILENT] We chose device : #0 `SN:210249ACD434' from 1 possible devices. [DIGILENT] Could not open device `SN:210249ACD434'. [DIGILENT] No support for opening the device selection GUI. Link to comment Share on other sites More sharing options...
JColvin Posted March 12, 2020 Share Posted March 12, 2020 Hi @Shani Kleinman, We don't have a lot of advice regarding the Metaware debugger; there might be some more advice in this thread, https://forum.digilentinc.com/topic/15863-information-about-jtag-hs2-working-on-haps-80/, but in the end you will likely need to reach out to Synopsis with regards to getting the Metaware to correct detect and work with the JTAG HS2. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
Shani Kleinman
Hi,
We are trying to use Metaware debugger with Digilent JTAG-HS2 cable HS2 for JTAG connection.
OS is Ubunto-18.
we've installed driver ( runtime and utilities from https://reference.digilentinc.com/reference/software/adept/start?redirect=1#software_downloads)
when performing >> lsusb -we see the device .
when performing >> djtgcfg enum
return: Found 1 device(s)
Device: JtagHs2
Product Name: Digilent JTAG-HS2
User Name: JtagHs2
Serial Number: 210249ACD43
when running with MetaWeare debugger we get the following msg: "Could not load libdjtg.so."
we try to add the dir to LD_LIBRARY_PATH but results is the same.
any idea what are we missing?
Thanks
Shani
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.