Jump to content
  • 0

Cora Z7-10 preset notr avialble in zynq block design


hmr

Question

Hej,

I try to configure the zynq7 PS in vivado 19.2 but the used board Cora Z7 is not available in the "Presets List". see screen dump. The board is selectable when I set up a new project.

I tried to import xps settings and addressed the file preset.xml directly from C:\Xilinx\Vivado\2019.2\data\boards\board_files\cora-z7-10\B.0 but "Current Preset: none"

What to do to preset the zynq PS for Cora Z7?

board.png

bd.png

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

Hi @hmr,

Add the Zynq Processing System in Block Design. After that click Run Block Automation and make sure that Apply Board Preset is checked. See picture below.

apply_board_preset.PNG.b35f2b955b6ef562e27ca0322f5c89f2.PNG

Now the Zynq is configured correctly (see picture below) but the preset does not appear in Preset section (Current Preset: None). I don't know the cause of this issue.

recustomize.thumb.PNG.2590d980187cd741bedf9f5c28a34c8c.PNG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...