Jump to content
  • 0

about FFT simulation in verilog


yongseok

Question

1 answer to this question

Recommended Posts

@yongseok,

Slow down, start from the top: What's in your design, what's your design doing, what inputs are you feeding it, etc.

Debugging an FFT is just like any other engineering task: split the design into parts, and separate what's going into the FFT from its surroundings, then test each individually.  With the information you've given above, it would be hard to know where to start breaking down the problem.

Dan

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...