TeslaCrytpo Posted January 16, 2020 Share Posted January 16, 2020 The CMOD S7 with at least 4 more analog inputs. If possible, add 6 more analog inputs to bring the total to 8. The XADC has the channels, the pins are are just not exposed. In a similar fashion, the CMOD A7 board has 2 analog inputs, but many pins that could be accessed as analog inputs (deferentially, of course) making it reasonable to have several analog inputs to the XADC on the CMOD A7 (both variants, 15 and 35.) Thanks. James Link to comment Share on other sites More sharing options...
xc6lx45 Posted January 16, 2020 Share Posted January 16, 2020 Just wondering whether that is worth the trouble. Internally, the pins are all muxed to the same ADC pair. For example, this chip http://www.ti.com/product/CD74HC4051 could do the same anywhere in your design. Link to comment Share on other sites More sharing options...
TeslaCrytpo Posted January 16, 2020 Author Share Posted January 16, 2020 I would rather have the mux operation inside the XADC versus the cross talk with external MUX. That is part of the appeal of the Cora board where so many analog pairs are brought to the header. For CMODA7 doing this while consuming some pins that would normally be dedicated to digital is fine; but just need more pins on the CMOD S7 for analog inputs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.