• 0
shantaramj

How to add ov5640 MIPI driver in kernel cofiguration using petalinux 2017.4

Question

Hello folks,

I am building Pcam-5c petalinux project. For this we are using Zybo z7-20 board and referring following github link:

  https://github.com/Digilent/Zybo-Z7-20-base-linux

  Software versions:
  Vivado ver.    = 2017.4
  petalinux ver. = 2017.4

        While building linux kernel we came to know that it's not initializes OV5640 camera drivers. Hence, we are trying to add drivers manually. But We are getting following building errors.

   If anybody has worked related to this please provide information on How to build Linux kernel for Mipi camera Pcam 5C.

 Error Log as follows :
 
* Camera sensor devices
| *
| Sony IMX274 sensor support (VIDEO_IMX274) [N/m/y/?] n
| OmniVision OV2659 sensor support (VIDEO_OV2659) [N/m/y/?] n
| OmniVision OV5640 sensor support (VIDEO_OV5640) [N/m/y/?] (NEW) aborted!
|
| Console input/output is redirected. Run 'make oldconfig' to update configuration.
|
| ERROR: oe_runmake failed
| make[4]: *** [/home/sqm/Documents/petalinux17/cam/build/tmp/work-shared/plnx_arm/kernel-source/scripts/kconfig/Makefile:39: silentoldconfig] Error 1
| make[3]: *** [/home/sqm/Documents/petalinux17/cam/build/tmp/work-shared/plnx_arm/kernel-source/Makefile:546: silentoldconfig] Error 2
| make[2]: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/kernel.release'.  Stop.
| make[1]: *** [Makefile:150: sub-make] Error 2
| make: *** [Makefile:24: __sub-make] Error 2
| WARNING: /home/sqm/Documents/petalinux17/cam/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/linux-xlnx/4.9-xilinx-v2017.4+gitAUTOINC+b450e900fd-r0/temp/run.do_compile.38499:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/sqm/Documents/petalinux17/cam/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/linux-xlnx/4.9-xilinx-v2017.4+gitAUTOINC+b450e900fd-r0/temp/log.do_compile.38499)
ERROR: Task (/home/sqm/Documents/petalinux17/components/yocto/source/arm/layers/meta-xilinx/recipes-kernel/linux/linux-xlnx_4.9.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2460 tasks of which 1925 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/sqm/Documents/petalinux17/components/yocto/source/arm/layers/meta-xilinx/recipes-kernel/linux/linux-xlnx_4.9.bb:do_compile
Summary: There were 2 ERRO
R messages shown, returning a non-zero exit code.
ERROR: Failed to build project

 

Thanks in advance

Edited by shantaramj

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now