INTT

Problem to make JTAG-HS3 cable working

Recommended Posts

Hi, 

 I have a trouble with JTAG-HS3 cable. When I execute boundary scan and initialize chain, then I get the error as follows:

"ERROR:iMPACT : A problem may exist in the hardware configuration. Check that the cable, scan chain, and power connections are intact, that the specified scan chain configuration matches the actual hardware, and that the power supply is adequate and delivering the correct voltage.

Searching through the web, I found the suggestion

https://forums.xilinx.com/t5/FPGA-Configuration/Digilent-JTAG-HS3-error-with-iMPACT-14-7/td-p/759444

which says I should install digilent software. So I searched through the web trying to find a driver from the digilent web page though, I cannot find it. Do we have to install a driver for JTAG-HS3?

I appreciate your advice. 

-intt

Share this post


Link to post
Share on other sites

Hi @INTT,

Since it appears you are using ISE and iMPACT, I believe the software you are looking for is available here: https://store.digilentinc.com/digilent-plugin-for-xilinx-tools-download-only/. As noted on the webpage, you will need the Digilent Adept System (for Windows) or Runtime (for Linux) for this to work. The appropriate Adept material is available for download here: https://reference.digilentinc.com/reference/software/adept/start.

Let me know if you have any questions.

Thanks,
JColvin

Share this post


Link to post
Share on other sites

Dear JColvin

Thanks for your reply and advice.

We installed the Digilent Adept System v2.19.2 (windows). However, It always showed the Initialization failed. We also tried to install the Utilities windows v2.2.1, but the result was the same.

I attach screenshot of which software installed, and the message when I open Digilent Adept software.

Does the connect (in right top) can choose JtagHs3 tahe means computer can find devise from USB port? But config also show no devices identified. 

We still lost some files? Which part could cause initialization failed?

 

Best Regards,

-intt

 

image.png.537ba74efce446880df7c557a6319002.pngimage.png.c351a5fc506c1f02e0bae192c9bf0941.png

Share this post


Link to post
Share on other sites

Hi, I am a newbie, I want to know whether HS3 would work with Spartan 6 FPGA. The guy from whom we buy stuffs is saying that we need to buy xilinx jtag programmer/debugger. But that would cost more than we could afford. I got confused and came here to help. I have also posted a help under new topic but it seemed no one replied. So I came here.

If this is a wrong place for this post I am glad to get it removed.

 

Thank you.

Share this post


Link to post
Share on other sites

Hello,

The JTAG HS3 should work with a Spartan-6 based FPGA without any problems. 

Thanks,
JColvin

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now